Xcessive Manufacturing - KA24 to GM Transmission adapter Plate (N-KA-GM-TA) e21sbvc Spring Rates:  6K Front

Spring Rates:  6K Front Springs 12K Rear Springs

The N1 Evolution Extreme is based on the RS Evolution Muffler with the addition of full titanium tips

Use OEM ball joints

Fire Marshal Systems are mechanical in operation being activated by strategically placed pull cables

This exclusive compound allows us to manufacture a bushing that has virtually the same performance as a solid bushing

Xcessive Manufacturing - KA24 to GM Transmission adapter Plate (N-KA-GM-TA) e21sbvc Spring Rates:  6K FrontWe've made this adapter plate for the KA to mate up a GM bell housing typical to swaps where the motor has been straichtened up and not sitting at the normal left side lean of the KA found in a 240SX from the factory. If you are going to run the adapter in a 240SX or on a motor that is sitting rotated to the left, the transmission will not sit straight up and down. If you plan to run an Auto trans, you will need to have a custom torque converter made