PELCO SEMClip 90 deg. specimen block mounts, M4 cylinder clamps When changing from a selected

When changing from a selected area image of a specimen to a diffraction pattern

It is recommended that the BSE signal of the SEM is used for imaging the particles since this a high contrast signal difference between the Pb/Ba/Sb particles and the glassy carbon substrate

These SEM double slotted mini vice specimen mounts allow for set screw vice clamping of thin sections and cross sections without the need for conductive paint

it can be regenerated easily by microwave (15-20 seconds on high) or conventional oven (3 hours at 115°C)

X-ray Beam Analysis (EPMA)

PELCO SEMClip 90 deg. specimen block mounts, M4 cylinder clamps When changing from a selectedThese PELCO SEMClip specimen M4 threaded mounts are designed for easy, quick and clean mounting of specimens for use with Hitachi SEMs. The spring loaded clips hold the sample securely and can accommodate samples with a thickness up to 2mm. No adhesives required and ideal to hold silicon chips, paper, wire, threads, thin films, sheet metal, etc. Specifications: 12mm W x 12mm L x 14mm H, 4 clips 12mm W x 48mm L x 14mm H, 10 clips 90 mounts for cross