SEM E-Beam lithography specimen mount, M4 cylinder Pack Size:Each Smooth surface superior to traditional

Smooth surface superior to traditional woven carbon tape for SEM and EDS analysis of small fibers and powders

400 square mesh copper Gilder grid

self-contained continuous vacuum system which does not use hoses replacing tweezers and hose-style wands

Tip radius is 0

The double adhesive and conductive design permits quick mounting of samples without using liquid or colloidal adhesives

SEM E-Beam lithography specimen mount, M4 cylinder Pack Size:Each Smooth surface superior to traditionalThe E Beam Lithography Mount is mounted on a 25mm aluminium cylinder stub positioned in such a way as to leave maximum sample space. The height of the gold on carbon test specimen is approximately 0. 5mm above the surface of the mount. M4 threaded hole in bottom. Material: Aluminium with copper clips and brass screws. The Gold on Carbon has gold particle size range from approximately 5nm to 150nm. Shipped in plastic storage box. Screw used is M2 x