Duratec® Clear Hi-Gloss Gel Coat Additive Options:Case (6 Quarts) urethane molds and parts

urethane molds and parts

construction of mold parting lines

this fabric can be certified to meet the requirements of: AMS-C-9084 Type XII-A (Class 1 and 2) *exception: G37 1/2 replaces K75 2/2

you can spray more than gel coat

Here is some information about the use of 6 lb

Duratec® Clear Hi-Gloss Gel Coat Additive Options:Case (6 Quarts) urethane molds and partsDuratec Clear High Gloss Additive can be blended with numerous gel coats to create a glossy, smooth finished surface. Mix at a 1: 1 ratio with regular gel coat to reduce viscosity and porosity, improve gloss level, and permit a complete open air cure. It can also be blended at 15% with tooling gel coats to upgrade mold surfaces, improve gloss retention, increase impact resistance, and reduce heat distortion. The reduction in viscosity allows gel coats