Articulated Vehicles Prohibited Post Mount Sign - 622.4 R2/RA2 (Face Only) Size:600mm When installing we recommend a

When installing we recommend a 3mm thick layer of adhesive is used

The protectors are used to protect encased cables or hoses from vehicles passing over the top or from the environment itself

the No Entry road marking is generally placed in the centre of the road and clearly shows road users where no entry restrictions apply

This car park entrance sign is part of our range of car park signs and is designed to be permanently post mounted

The total length is a little longer than this at 1

Articulated Vehicles Prohibited Post Mount Sign - 622.4 R2/RA2 (Face Only) Size:600mm When installing we recommend aWhere a length of road isnt suitable for a long vehicle with a hinged trailer, a "No articulated vehicles" sign (diagram 622. 4) should be used to prevent their access. An articulated vehicle is usually a long bus or lorry with a pivot joint to allow for sharper turning. Some areas may be too busy, tight or have adverse camber making it difficult to drive on for one of these vehicles which would lead to the use of this regulatory sign. The sign can be