Blox Honda S2000 Racing Half Shaft Spacers-Silver (Recommended for vehicles lowered 1.25" or more) - BXDL-00101-SI Window Nets Straight -3AN To Straight -3AN

Straight -3AN To Straight -3AN 27" Brake Line - 3300-03-27

For STI owners that are currently using a GrimmSpeed TMIC

The K Series Ultra Street Manifold uses the EARLY PRB/ PRC style cylinder head and throttle body mounting flange pattern but can be installed on the LATE RBC/ RBB style cylinder heads through the use of an aftermarket Water Bypass Adapter and our DBW Throttle Body Adapter (PN# 309-05-0120)

a method of matching the flow rate in both the linear

Most people will put a 1/4" spacer so the tire does not hit the fender

Blox Honda S2000 Racing Half Shaft Spacers-Silver (Recommended for vehicles lowered 1.25" or more) - BXDL-00101-SI Window Nets Straight -3AN To Straight -3ANThe Blox Racing half shaft spacer kit is specifically designed for lowered Honda S2000s. When the vehicle is lowered, the angle of the driveshaft is altered, causing play between the driveshaft roller and spider. This in turn, causes and places stress at the CV joints and differential output shaft bearings. The result is a prominent clicking and worse, rear end vibrations. The Blox Racing half shaft spacer kit helps alleviate the stress, and